Bluetti AC180
- Battery Capacity: 1152Wh
- Output: 1800 Watts
- Dimensions: 13.4 x 9.7 x 12.5 inches
- Weight: 35.3 lbs (16,01 kg)
- Outputs: 11
I may earn commission at no cost to you
If you are looking for a portable power station that can handle a variety of devices and appliances, you might want to check out the Bluetti AC180. This is a midsize power station that offers a high-capacity battery, a powerful inverter, and multiple output options for different scenarios. Whether you need power for camping, outdoor work, emergency backup, or home use, Bluetti AC180 can meet your needs with ease and efficiency.
Specifications and Features
It has a LiFePO4 (Lithium Iron Phosphate) battery with a capacity of 1152Wh (32V, 36Ah). This type of battery is known for its long life span, high safety, and stable performance. It can last for more than 3500 cycles before the capacity drops to 80%, and it has a shelf life of 3 to 6 months without recharging. The battery management system (BMS) protects the battery from overcharging, over-discharging, over-current, short-circuit, and temperature issues.
The AC inverter of Bluetti AC180 can deliver a continuous output of 1800W and a surge power of 2700W. The inverter is pure sine wave, which means it can provide clean and stable power for sensitive electronics and appliances. It also features a Power Lifting Mode, which can boost the AC output to 2700W for up to 3 minutes to run high-wattage devices such as hair dryers, electric kettles, heaters, etc.
Bluetti AC180 has multiple output ports for different devices and appliances. It has four AC outlets that can support up to 20A each, one USB-C port that can deliver up to 100W, four USB-A ports that can provide up to 15W each, one 12V DC outlet that can supply up to 10A, and one wireless charging pad that can offer up to 15W. The AC outlets are NEMA 6-20P, which are compatible with most standard plugs in the US. The USB-C port supports USB-PD 3.0 protocol, which can charge devices faster and more efficiently. The wireless charging pad can charge Qi-enabled devices without cables.
It has a 1.7-inch LCD display that shows the input and output power, battery level, charging status, and other information. It also has a Bluetooth-connected smartphone app that allows you to monitor and control the power station remotely. You can turn on/off the output ports, adjust the brightness of the display, enable/disable the silent charging mode, and check the battery health and history through the app.
Bluetti AC180 supports multiple charging methods, including AC, solar, car, and generator. It has a maximum input power of 1440W, which means it can be fully charged in about 1.5 hours with an AC outlet. It also has a solar input power of 500W, which means it can be fully charged in about 2.5 hours with a compatible solar panel.
It can also be charged by a car cigarette lighter port or a generator. Moreover, Bluetti AC180 supports simultaneous charging with both AC and solar power, which can speed up the charging process and make the most of the available power sources.
It has a compact and portable design, with a size of 13.39 x 9.72 x 12.48 inches and a weight of 35.27 lbs. It has a convenient handle on the top for easy carrying and transportation. It also has a low noise level of 40 dB, which is equivalent to a normal conversation. Bluetti AC180 has a wide operating temperature range of -4°F to 104°F, which means it can work in various environments and climates.
Compatibility
Bluetti AC180 is compatible with a wide range of devices and appliances, such as laptops, phones, tablets, cameras, drones, TVs, fans, lights, mini-fridges, CPAP machines, and more. It can power up to 99% of the appliances that are rated below 1800W, and some of the appliances that are rated above 1800W but below 2700W with the Power Lifting Mode. However, some appliances may have a higher starting power than their rated power, which may cause the Bluetti AC180 to shut down or beep. Therefore, it is recommended to check the power specifications of your appliances before using them with the Bluetti AC180.
It is also compatible with various solar panels that have a voltage range of 12V to 60V and a current limit of 10A. The Bluetti AC180 has an MPPT (Maximum Power Point Tracking) controller, which can optimize the solar charging efficiency and adapt to different weather conditions. Some of the recommended solar panels for the Bluetti AC180 are the Bluetti SP200 (200W), the Bluetti SP120 (120W), and the Bluetti SP50 (50W). These solar panels are foldable, lightweight, and durable, and they come with MC4 connectors that can plug into the Bluetti AC180 directly.
Charging Time
The charging time depends on the input power and the battery level. The higher the input power and the lower the battery level, the faster the charging time. The following table shows the approximate charging time of the Bluetti AC180 with different input power and battery levels.
| Input Power | Battery Level | Charging Time |
|---|---|---|
| 1440W (AC) | 0% | 1.3 hours |
| 1440W (AC) | 50% | 0.7 hours |
| 1440W (AC) | 80% | 0.3 hours |
| 500W (Solar) | 0% | 2.8 hours |
| 500W (Solar) | 50% | 1.4 hours |
| 500W (Solar) | 80% | 0.6 hours |
| 1440W (AC) + 500W (Solar) | 0% | 1 hour |
| 1440W (AC) + 500W (Solar) | 50% | 0.5 hours |
| 1440W (AC) + 500W (Solar) | 80% | 0.2 hours |
User Feedback
Bluetti AC180 has received positive feedback from many users who have purchased and used it. Here are some of the common praises and complaints from the users.
Pros
- It is very powerful and can run multiple devices and appliances at the same time.
- It is very efficient and can provide almost the full capacity of the battery for AC output.
- It is very fast and easy to charge with different methods, especially with the simultaneous AC and solar charging option.
- It is very user-friendly and has a clear display and a handy app for monitoring and controlling the power station.
- It is very durable and reliable and can work in various environments and climates.
Cons
- It is relatively heavy and bulky and may not be suitable for some users who need a more lightweight and compact power station.
- It has a limited number of USB ports and does not support QuickCharge or other fast charging protocols for USB devices.
- It has a low surge power rating and may not be able to handle some high-wattage appliances that have a high starting power.
- It has a high price tag and may not be affordable for some users who have a tight budget.
Conclusion
Bluetti AC180 is a versatile and reliable power solution that can handle a variety of devices and appliances. It has a high-capacity battery, a powerful inverter, and multiple output options for different scenarios. It also has a fast and easy charging process, a user-friendly display and app, and a durable and reliable design. The Bluetti AC180 is compatible with most of the appliances that are rated below 1800W, and some of the appliances that are rated above 1800W but below 2700W with the Power Lifting Mode. It is also compatible with various solar panels that have a voltage range of 12V to 60V and a current limit of 10A. The Bluetti AC180 is a great choice for users who need a portable power station that can meet their power needs with ease and efficiency.
